MT series (High Range)
Dual Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series (Hydraulic Pressure Range)
Dual Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series (High Range PD)
Dual Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
DS series (High Range DP)
Dual Switches
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- CE
- IP66
FC (Ex-proof) - High Range
Pneumatic / Air Relay Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP239
FC (Ex-Proof) - Hydraulic Diaphragm
Pneumatic / Air Relay Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP240
FC (Ex-proof) - Low DP High Proof
Pneumatic / Air Relay Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP241
FC (Ex-proof) - Vacuum
Pneumatic / Air Relay Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP242
Rigel Series
Pressure Transmitter
Rigel series transmitter is the ideal solution for users with demanding measurement requirements in general industrial applications. It provides high performance combined with safe and reliable operation, even under extreme conditions. It is available in a durable “heavy-duty” version which features a robust all-stainless-steel design. This makes it an easy task for the Rigel to withstand the severe pressure and operating conditions, high temperatures, and a variety of media.
- -
Comparison test pumps
Other Products
A comparison test pump is a device by which pressure gauges can be calibrated in comparison with masterpressure gauges. These can also be used for comparison of master gauges with normal use pressure gauges after periodic intervals to detect a drift in calibration.
2 Valve Manifold
Accessories
These manifolds provide a direct mounting feature with isolation & drain/calibration in a single unit. These type of manifolds can be directly mounted on the static pressure transmitter to eliminate several parts and joints.
3 Valve Manifold
Accessories
These manifolds are generally used in differential pressure applications with pressure gauges, Pressure switches & pressure transmitters. Two isolation valves & one equalising valve is provided.
- .
Cu Impulse Tube
Accessories
To protect the Pressure, Vacuum or, DP switches from the higher temperature, we provide Impulse Tubes, which is also called as Capillary Tubes. The Instrument should be installed at one end of the Impulse Tube, ensuring that there are no any leakages at that end, and the other end of the impulse tube should be connected to the process.
- .
SS Impulse Tube
Accessories
To protect the Pressure, Vacuum or, DP switches from the higher temperature, we provide Impulse Tubes, which is also called as Capillary Tubes. The Instrument should be installed at one end of the Impulse Tube, ensuring that there are no any leakages at that end, and the other end of the impulse tube should be connected to the process.
- .
Siphon
Accessories
Siphons are used to protect the pressure switches from the effect of hot pressure media such as steam and also to reduce the effect of rapid pressure surges. The pressure medium forms a condensate and is collected inside the coil or pigtail portion of the pressure switch siphon.
- .
~Type A
Accessories
Diaphragm seals(Chemical Seals) are partitions used with pressure switches which prevent the measured medium from entering the pressure capsule of the pressure switch. Diaphragm seals solve many problems encountered in sensing, which are otherwise impossible to solve with only pressure switches.
- .
~Type B
Accessories
Diaphragm seals(Chemical Seals) are partitions used with pressure switches which prevent the measured medium from entering the pressure capsule of the pressure switch. Diaphragm seals solve many problems encountered in sensing, which are otherwise impossible to solve with only pressure switches.
- .
~Type C
Accessories
Diaphragm seals(Chemical Seals) are partitions used with pressure switches which prevent the measured medium from entering the pressure capsule of the pressure switch. Diaphragm seals solve many problems encountered in sensing, which are otherwise impossible to solve with only pressure switches.
- .
~Type D
Accessories
Diaphragm seals(Chemical Seals) are partitions used with pressure switches which prevent the measured medium from entering the pressure capsule of the pressure switch. Diaphragm seals solve many problems encountered in sensing, which are otherwise impossible to solve with only pressure switches.
- .
Snubber
Accessories
snubber is a device used to suppress ("snub") excess force or rapid movement in pressure switches . Pressure snubbers are designed to dampen the effect of pressure pulses and spikes to assure longer service life and readability of pressure switches in harsh applications.
- .
Gauge Saver
Accessories
Gauge savers are normally a device that prevents over pressuring. They function in a similar fashion as relieve valve, only in reverse, with spring that will close off to the gauge if the pressure goes above the set pressure.
- .
Pipe Mounting Brackets
Accessories
Accessories can be provided with pressure switches to make it suitable for any particular application. Following are the major accessories are major accessories provided with pressure switches.
- .
ATEX SS double compression cable gland M20 X 1.5
Accessories
A cable gland (also known as cable connector or fitting) is a device designed to attach and secure the end of a cable to the equipment/ Switch or Gauge
- .
ATEX SS double compression cable gland 1/2" NPT
Accessories
A cable gland (also known as cable connector or fitting) is a device designed to attach and secure the end of a cable to the equipment/ Switch or Gauge
- .
ATEX SS double compression cable gland 3/4" NPT
Accessories
A cable gland (also known as cable connector or fitting) is a device designed to attach and secure the end of a cable to the equipment/ Switch or Gauge
- .
ACMS – IoT based Fire Fighting Monitoring Solution
ACMS - Smart Fire Fighting Solution
-
- In line with the Maharashtra State GR
FC series (Ex-proof)
High Range Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FC series (Ex-proof)
High Range Pressure Difference Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FC series (Ex-proof)
Vacuum Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FC series (Ex-proof)
High Range Compound Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FC series (Ex-proof)
Temperature Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FE series (Ex-proof)
High Range Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
FE series (Ex-proof)
High Range Pressure Difference Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
FE series (Ex-proof)
Vacuum Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
FE series (Ex-proof)
High Range Compound Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
FE series (Ex-proof)
Temperature Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
MD series
High Range Pressure Difference Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MD series
High Range Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
High Range Pressure Difference Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MD series
Vacuum Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MD series
High Range Compound Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MD series
Temperature Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
High Range Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MZ series
High Range Pressure Difference Switch
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
- IP68
MT series
Vacuum Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
High Range Compound Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
Temperature Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MZ series
High Range Switch
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
- IP68
DP series (Compact)
High Range Pressure Difference Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 54
MZ series
Vacuum Switch
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
- IP68
MZ series
High Range Compound Switch
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
- IP68
MZ series
Temperature Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
- IP68
MG / ME series (Compact)
High Range Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 40
PD series (Compact)
High Range Pressure Difference Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 65
MN / MA series (Compact), Fixed diff. / Adjustable diff.
Vacuum Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 65
FC series (Ex-proof)
Low Range Compound Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FC series (Ex-proof)
Direct Mounted Temperature Switches
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
MG / ME triclover hygeine range (Compact)
High Range Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 40
VS1 series (Compact), Fixed differential
Vacuum Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
FE series (Ex-proof)
Low Range Compound Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
FE series (Ex-proof)
Direct Mounted Temperature Switches
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
MN / MA series (Compact)
High Range Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 65
FC series (Ex-proof)
High Range DP Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
MG series (Compact), Fixed differential
Vacuum Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 54
HM series (Compact)
High Range Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 65
FE series (Ex-proof)
High Range DP Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
KU series (OEM), Fixed differential
Vacuum Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- CE
- IP30
MD series
Low Range Compound Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MD series
Direct Mounted Temperature Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
DT series (Compact)
High Range Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
MD series
High Range DP Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
Low Range Compound Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
Direct Mounted Temperature Switches
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
KU series (OEM) (15A,125/250 VAC,5A 30VDC)
High Range Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- CE
- IP30
MT series
High Range DP Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MZ series
Direct Mounted Temperature Switches
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
- IP68
SE subminiature series (OEM)
High Range Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- CE
MZ series
High Range DP Switch
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
- IP68
SE series (OEM)
Direct Mounted Temperature Switches
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- CE
SE subminiature - DIN connector type (OEM)
High Range Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- CE
FC series (Ex-proof)
Hydraulic Range DP Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
SE subminiature - 'He' leak tested (OEM)
High Range Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- CE
MZ / MX series (OEM)
High Range Switch
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
FE series (Ex-proof)
Hydraulic Range DP Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
MZ__A / MX__A series (OEM)
High Range Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- CE
- IP66
MD series
Hydraulic Range DP Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
SA series (OEM)
High Range Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- IP 65
MT series
Hydraulic Range DP Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
SM series (OEM)
High Range Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- IP 54
EZ / EX series (OEM)
High Range Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
MZ series
Hydraulic Range DP Switch
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
- IP68
CS 12 (Compressor switch)
High Range Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
FC series (Ex-proof)
Low Range Pressure Difference Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FC series (Ex-proof)
Low Range Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FE series (Ex-proof)
Low Range Pressure Difference Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
FE series (Ex-proof)
Low Range Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
MD series
Low Range Pressure Difference Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MD series
Low Range Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
Low Range Pressure Difference Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
Low Range Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
PD series (Compact)
Low Range Pressure Difference Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 65
MN / MA series (Compact)
Low Range Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 65
PA series (Compact)
Low Range Pressure Difference Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 65
FC series (Ex-proof)
High Proof High Range Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FC series (Ex-proof)
Low DP High Proof Pressure Difference Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FE series (Ex-proof)
High Proof High Range Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ISI
- CE
- IP66
FE series (Ex-proof)
Low DP High Proof Pressure Difference Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
MD series
High Proof High Range Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MD series
Low DP High Proof Pressure Difference Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
High Proof High Range Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
Low DP High Proof Pressure Difference Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MZ series
High Proof High Range Switch
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
- IP68
FC series (Ex-proof)
Low ΔP High Proof Pressure Difference Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
MD series
Hydraulic Range Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
FE series (Ex-proof)
Low ΔP High Proof Pressure Difference Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
MT series
Hydraulic Range Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MD series
Low ΔP High Proof Pressure Difference Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MZ series
Hydraulic Range Switch
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
- IP68
MT series
Low ΔP High Proof Pressure Difference Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
DN / DA series (Compact)
Hydraulic Range Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC
FC series (Ex-proof)
Ultra Low Range PD Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
HM / HO series (Compact)
Hydraulic Range Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 65
FE series (Ex-proof)
Ultra Low Range PD Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
HM / HO 350 (Compact)
Hydraulic Range Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
- IP 65
MD series
Ultra Low Range PD Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
DT series (Compact)
Hydraulic Range Switch
The initial of our product lines, these switches are meant for light duty applications for the OEM industry. Many of them need to be used in clean atmospheres, sometimes inside a panel. These are compact, low cost and built just for the intended use. Most of them can be configured for a particular purpose by selecting the wetted parts, but electrical ratings are restricted to 5 A, 250 VAC.
MT series
Ultra Low Range PD Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
CF series (OEM)
Ultra Low Range PD Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- IP 54
SA series (OEM)
Hydraulic Range Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- IP 65
CK series (OEM)
Ultra Low Range PD Switch
These are the items which are used in most general purpose applications. These switches cannot be configured and are generally intended for stock and sell. As such, many of them are picked from all the above categories, and can be ordered by part numbers. These will generally have minimum order quantities, and would be available off the shelf.
- IP 54
FC series (Ex-proof)
Low Range High Proof Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FE series (Ex-proof)
Low Range High Proof Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
MD series
Low Range High Proof Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
Low Range High Proof Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
FC series (Ex-proof)
Ultra Low Range Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FE series (Ex-proof)
Ultra Low Range Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
MD series
Ultra Low Range Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
Ultra Low Range Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
FC series (Ex-proof)
Flanged Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FE series (Ex-proof)
Flanged Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
MD series
Flanged Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
Flanged Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MZ series
Flanged Switch
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
- IP68
FC series (Ex-proof)
Hydraulic Diaphragm Switch
ATEX, IECEx & PESO certified FC series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- ATEX
- CoC
- PESO
- ISI
- CE
- IP66
FE series (Ex-proof)
Hydraulic Diaphragm Switch
PESO certified FE series pressure and temperature switches have been designed for gas group IIC, the most severe of the explosive gases, and hence can be used in lower severity atmospheres, typically in IIA and IIB. With grey cast iron enclosures, these can also be used in mines.
- PESO
- ISI
- IP66
MD series
Hydraulic Diaphragm Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MT series
Hydraulic Diaphragm Switch
MD and MT series pressure switches have been designed for applications that require robust, long lasting switches, coupled with a high accuracy and repeatability, in adverse conditions. By using appropriate capsules and wetted parts, these series pressure switches can be used for thousands of applications. A wide choice of electrical elements including SPDT, DPDT, gold plated contacts make these switches ideal for a variety of critical applications. A wide scale, when opted for, offers ease of setting, given the smaller least counts.
- CE
- IP66
MZ series
Hydraulic Diaphragm Switch
MZ series pressure switches have been designed for applications that require cost effective outdoor mounting, in aggressive environments. The tough polycarbonate cover, fitted on a stainless steel base, retained by SS screws offers excellent resistance to corrosion, and also allows a view of the internal scale and working of the pressure switch. The reliable micro switch offers narrow dead-band, switching values, which have excellent repeatability
- CE
- IP66
- IP68